Subvenciones a fondo perdido para pymes

Subvenciones Subvenciones a fondo perdido para pymes. Saber más   • Subvenciones europeas, nacionales y de las comunidades autónomas. • Buscador de subvenciones de toda clase para todo el territorio nacional. • Alertas programables. • Gestión incluída.   Quiero saber más Si lo prefieres puedes llamarnos al 981 90 49 49 (de lunes a viernes de 9 a 16 horas)

Cambios en Enisa en 2017

Donde antes había 4 líneas, ahora hay 3. La nueva línea Enisa Crecimiento hace a Enisa más polivalente que nunca. 1. Enisa crecimiento - Entre 25mil y 1,5M de euros. - Vencimiento máximo a 9 años con un máximo de 7 de carencia del principal. - Para pymes con proyectos de consolidación, crecimiento e internacionalización. Quiero saber más 2. Enisa emprendedores - Entre 25mil y 300mil euros. - Vencimiento máximo de 6 años con un máximo de 2 años de carencia del principal. - Para empresas de menos de 2 años. Quiero saber más 3. Enisa jóvenes emprendedores - Entre 25mil y 75mil euros. - Vencimiento máximo de 4 años con un año de carencia del principal. - Para empresas de menos de 2 años con socios mayoritarios menores de 40 años. Quiero saber más Somos expertos en gestionar estas líneas. Podemos conseguir la tuya. Quiero saber más Si lo prefieres puedes llamarnos al 981 90 49 49 (de lunes a viernes de 9 a 16 horas)

Re: Posthumous Degrees at ceremonies

My comments below; let me know if you would like to see the program.

 

Jerri

 

From: MACRAO Listserv [mailto:MACRAO@LISTSERV.GFCMSU.EDU] On Behalf Of Charity Walters
Sent: Tuesday, March 28, 2017 11:22 AM
To: MACRAO@LISTSERV.GFCMSU.EDU
Subject: Posthumous Degrees at ceremonies

 

As awarding a posthumous degree during ceremonies is relatively new to me I hoping you all can help me with some best practices related to three questions in the actual ceremony.

 

1.  What type of language is on the diploma presented? i.e. does it say anywhere posthumous or do you print it as a standard diploma? Yes the diploma says awarded Post Humously

2.  Have you marked it in the program with a special designation? In the program we place their name at the end with “Posthoumous Degree: name of student”

3.  For those smaller campuses, have you notified the participating graduates so they are not caught off guard when they hear the students name announced?  i.e. student was very known on campus….we are trying to balance between honoring the parents request and at the same time not make it a mournful day for the graduates that are there is celebrate. We have not notified, most of the students in the department have been made aware that the parents will be there accepting the diploma.  The President has some very nice words she says.

 

 

Thanks for your insight.  Always appreciated.

 

Charity Walters| Registrar and Director of Institutional Research | The University of Montana Western | 710 South Atlantic Street | Dillon, Montana 59725 |
Phone 406.683.7471

“Start by doing what is necessary; then do what’s possible; and suddenly you are doing the impossible.” St. Francis of Assisi

 

 

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ2IGp3ZXN0b25ATU9OVEFOQS5FRFUgTUFDUkFPIMP%2FNyqNrWjQ&c=SIGNOFF

Posthumous Degrees at ceremonies

As awarding a posthumous degree during ceremonies is relatively new to me I hoping you all can help me with some best practices related to three questions in the actual ceremony.

 

1.  What type of language is on the diploma presented? i.e. does it say anywhere posthumous or do you print it as a standard diploma?

2.  Have you marked it in the program with a special designation?

3.  For those smaller campuses, have you notified the participating graduates so they are not caught off guard when they hear the students name announced?  i.e. student was very known on campus….we are trying to balance between honoring the parents request and at the same time not make it a mournful day for the graduates that are there is celebrate.

 

Thanks for your insight.  Always appreciated.

 

Charity Walters| Registrar and Director of Institutional Research | The University of Montana Western | 710 South Atlantic Street | Dillon, Montana 59725 |
Phone 406.683.7471

“Start by doing what is necessary; then do what’s possible; and suddenly you are doing the impossible.” St. Francis of Assisi

 

Intercambio

La red de intercambio entre empresas TrocoBuy es la primera red de intercambio multilateral para pymes de España y una de las pocas del mundo. Únete a TrocoBuy y consigue lo que tu empresa necesite a cambio de tus productos o servicios. Descubre TrocoBuy

Re: Showing "Full" or "Closed" on the class schedule

This is housed in SOATERM under Schedule Search Controls. Mark ‘display closed section’ this will show the class as closed on the MyInfo schedule.

 

Hope that helps!

 

Alisha

 

From: MACRAO Listserv [mailto:MACRAO@LISTSERV.GFCMSU.EDU] On Behalf Of Eggum, Heather A
Sent: Monday, March 27, 2017 9:19 AM
To: MACRAO@LISTSERV.GFCMSU.EDU
Subject: Re: Showing "Full" or "Closed" on the class schedule

 

I believe that anytime a class reaches capacity or has a cap set to zero, the CLOSED message will appear. We use Banner 8.

 

 

 

Sent via the Samsung Galaxy S® 6, an AT&T 4G LTE smartphone

 

 

-------- Original message --------

From: Charity Walters <Charity.Walters@UMWESTERN.EDU>

Date: 3/27/17 9:16 AM (GMT-07:00)

To: MACRAO@LISTSERV.GFCMSU.EDU

Subject: Re: Showing "Full" or "Closed" on the class schedule

 

A meant to add this screen shot and dialogue with my previous email.

 

To give a better idea of what I’m looking for here is a print screen from MSU Bozeman’s website where the word “Closed” is appearing above the courses that are full.  I believe they are on XE, but I’m curious if this same capability is available for Banner 8?

 

Closed classes will appear on the schedule if you check the box under SOATERM, but that doesn’t cause the word “closed” to show up with them on the online schedule.  I’m curious to figure out the trick to get that word to show up on the online class schedule.

 

 

Charity Walters| Registrar and Director of Institutional Research | The University of Montana Western | 710 South Atlantic Street | Dillon, Montana 59725 |
Phone 406.683.7471

“Start by doing what is necessary; then do what’s possible; and suddenly you are doing the impossible.” St. Francis of Assisi

 

 

 

From: MACRAO Listserv [mailto:MACRAO@LISTSERV.GFCMSU.EDU] On Behalf Of Charity Walters
Sent: Monday, March 27, 2017 8:20 AM
To: MACRAO@LISTSERV.GFCMSU.EDU
Subject: Showing "Full" or "Closed" on the class schedule

 

Hi all!

 

This email question relates to the Banner online course scheduling system

 

I’m trying to figure out how to set up our online class schedule so that the word “Full” or Closed” appears on the schedule when the class has reached its seat limits.  I see that a few of you have this functionality and would appreciate your insight regarding how to set it up?  Is it a Banner 9/XE function or can it be done in Banner 8?

 

Thanks for any insight you may have.

 

It’s appreciated!

 

Charity

 

Charity Walters| Registrar and Director of Institutional Research | The University of Montana Western | 710 South Atlantic Street | Dillon, Montana 59725 |
Phone 406.683.7471

“Start by doing what is necessary; then do what’s possible; and suddenly you are doing the impossible.” St. Francis of Assisi

 

 

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ1IG1pY2hlbGxlLmdhbGxpbmVhdXhATVNVTi5FRFUgTUFDUkFPICJDs%2Fg3BiiU&c=SIGNOFF

 

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ1IENoYXJpdHkuV2FsdGVyc0BVTVdFU1RFUk4uRURVIE1BQ1JBTwFkcHP8YTji&c=SIGNOFF

 

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ1IGhlYXRoZXIuZWdndW1ATVNVQklMTElOR1MuRURVIE1BQ1JBT1EPzlOFR7xC&c=SIGNOFF

 

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ1IGFsaXNoYS5zY2hyb2VkZXJATVNVTi5FRFUgTUFDUkFPIAezi0s2nP%2Bc&c=SIGNOFF

Re: Showing "Full" or "Closed" on the class schedule

I believe that anytime a class reaches capacity or has a cap set to zero, the CLOSED message will appear. We use Banner 8.

Sent via the Samsung Galaxy S® 6, an AT&T 4G LTE smartphone

-------- Original message --------

From: Charity Walters <Charity.Walters@UMWESTERN.EDU>

Date: 3/27/17 9:16 AM (GMT-07:00)

To: MACRAO@LISTSERV.GFCMSU.EDU

Subject: Re: Showing "Full" or "Closed" on the class schedule

A meant to add this screen shot and dialogue with my previous email.

 

To give a better idea of what I'm looking for here is a print screen from MSU Bozeman's website where the word "Closed" is appearing above the courses that are full.  I believe they are on XE, but I'm curious if this same capability is available for Banner 8?

 

Closed classes will appear on the schedule if you check the box under SOATERM, but that doesn't cause the word "closed" to show up with them on the online schedule.  I'm curious to figure out the trick to get that word to show up on the online class schedule.

 

 

Charity Walters| Registrar and Director of Institutional Research | The University of Montana Western | 710 South Atlantic Street | Dillon, Montana 59725 |
Phone 406.683.7471

"Start by doing what is necessary; then do what's possible; and suddenly you are doing the impossible." St. Francis of Assisi

 

 

 

From: MACRAO Listserv [mailto:MACRAO@LISTSERV.GFCMSU.EDU] On Behalf Of Charity Walters
Sent: Monday, March 27, 2017 8:20 AM
To: MACRAO@LISTSERV.GFCMSU.EDU
Subject: Showing "Full" or "Closed" on the class schedule

 

Hi all!

 

This email question relates to the Banner online course scheduling system

 

I'm trying to figure out how to set up our online class schedule so that the word "Full" or Closed" appears on the schedule when the class has reached its seat limits.  I see that a few of you have this functionality and would appreciate your insight regarding how to set it up?  Is it a Banner 9/XE function or can it be done in Banner 8?

 

Thanks for any insight you may have.

 

It's appreciated!

 

Charity

 

Charity Walters| Registrar and Director of Institutional Research | The University of Montana Western | 710 South Atlantic Street | Dillon, Montana 59725 |
Phone 406.683.7471

"Start by doing what is necessary; then do what's possible; and suddenly you are doing the impossible." St. Francis of Assisi

 

 

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ1IG1pY2hlbGxlLmdhbGxpbmVhdXhATVNVTi5FRFUgTUFDUkFPICJDs%2Fg3BiiU&c=SIGNOFF

 

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ1IENoYXJpdHkuV2FsdGVyc0BVTVdFU1RFUk4uRURVIE1BQ1JBTwFkcHP8YTji&c=SIGNOFF

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ1IGhlYXRoZXIuZWdndW1ATVNVQklMTElOR1MuRURVIE1BQ1JBT1EPzlOFR7xC&c=SIGNOFF

Re: Showing "Full" or "Closed" on the class schedule

A meant to add this screen shot and dialogue with my previous email.

 

To give a better idea of what I’m looking for here is a print screen from MSU Bozeman’s website where the word “Closed” is appearing above the courses that are full.  I believe they are on XE, but I’m curious if this same capability is available for Banner 8?

 

Closed classes will appear on the schedule if you check the box under SOATERM, but that doesn’t cause the word “closed” to show up with them on the online schedule.  I’m curious to figure out the trick to get that word to show up on the online class schedule.

 

 

Charity Walters| Registrar and Director of Institutional Research | The University of Montana Western | 710 South Atlantic Street | Dillon, Montana 59725 |
Phone 406.683.7471

“Start by doing what is necessary; then do what’s possible; and suddenly you are doing the impossible.” St. Francis of Assisi

 

 

 

From: MACRAO Listserv [mailto:MACRAO@LISTSERV.GFCMSU.EDU] On Behalf Of Charity Walters
Sent: Monday, March 27, 2017 8:20 AM
To: MACRAO@LISTSERV.GFCMSU.EDU
Subject: Showing "Full" or "Closed" on the class schedule

 

Hi all!

 

This email question relates to the Banner online course scheduling system

 

I’m trying to figure out how to set up our online class schedule so that the word “Full” or Closed” appears on the schedule when the class has reached its seat limits.  I see that a few of you have this functionality and would appreciate your insight regarding how to set it up?  Is it a Banner 9/XE function or can it be done in Banner 8?

 

Thanks for any insight you may have.

 

It’s appreciated!

 

Charity

 

Charity Walters| Registrar and Director of Institutional Research | The University of Montana Western | 710 South Atlantic Street | Dillon, Montana 59725 |
Phone 406.683.7471

“Start by doing what is necessary; then do what’s possible; and suddenly you are doing the impossible.” St. Francis of Assisi

 

 

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ1IG1pY2hlbGxlLmdhbGxpbmVhdXhATVNVTi5FRFUgTUFDUkFPICJDs%2Fg3BiiU&c=SIGNOFF

 

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ1IENoYXJpdHkuV2FsdGVyc0BVTVdFU1RFUk4uRURVIE1BQ1JBTwFkcHP8YTji&c=SIGNOFF

Re: Showing "Full" or "Closed" on the class schedule

Good Morning Charity,

 

From what I have seen, when you don’t apply a waitlist and cap the enrollment to 20. Once the class reaches 20 the class lists closed.

 

I know right now I am listing classes with “0” enrollment, “0” waitlist. Because another concern is ensuring the room is marked as in use.

 

Hope this helps and if you don’t mind posting more scheduling issues/conflicts/questions and answers that would be great.

 

 

Michelle Gallineaux

Administrative Assoc II/Registrar

Montana State University-Northern

PO Box 7751 Havre, MT 59501

Phone: (406) 265-3703

Fax: (406) 265-3788

 

CC: on file

 

 

 

From: MACRAO Listserv [mailto:MACRAO@LISTSERV.GFCMSU.EDU] On Behalf Of Charity Walters
Sent: Monday, March 27, 2017 8:20 AM
To: MACRAO@LISTSERV.GFCMSU.EDU
Subject: Showing "Full" or "Closed" on the class schedule

 

Hi all!

 

This email question relates to the Banner online course scheduling system

 

I’m trying to figure out how to set up our online class schedule so that the word “Full” or Closed” appears on the schedule when the class has reached its seat limits.  I see that a few of you have this functionality and would appreciate your insight regarding how to set it up?  Is it a Banner 9/XE function or can it be done in Banner 8?

 

Thanks for any insight you may have.

 

It’s appreciated!

 

Charity

 

Charity Walters| Registrar and Director of Institutional Research | The University of Montana Western | 710 South Atlantic Street | Dillon, Montana 59725 |
Phone 406.683.7471

“Start by doing what is necessary; then do what’s possible; and suddenly you are doing the impossible.” St. Francis of Assisi

 

 

---

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDQ1IG1pY2hlbGxlLmdhbGxpbmVhdXhATVNVTi5FRFUgTUFDUkFPICJDs%2Fg3BiiU&c=SIGNOFF

Showing "Full" or "Closed" on the class schedule

Hi all!

 

This email question relates to the Banner online course scheduling system

 

I’m trying to figure out how to set up our online class schedule so that the word “Full” or Closed” appears on the schedule when the class has reached its seat limits.  I see that a few of you have this functionality and would appreciate your insight regarding how to set it up?  Is it a Banner 9/XE function or can it be done in Banner 8?

 

Thanks for any insight you may have.

 

It’s appreciated!

 

Charity

 

Charity Walters| Registrar and Director of Institutional Research | The University of Montana Western | 710 South Atlantic Street | Dillon, Montana 59725 |
Phone 406.683.7471

“Start by doing what is necessary; then do what’s possible; and suddenly you are doing the impossible.” St. Francis of Assisi

 

Fei – Fondos Europeos

Línea FEI - Iniciativa Pymes con fondos europeos: FEDER, Horizonte 2020, FEI y BEI. Para Pymes y autónomos constituidos y que operen en España. Importe máximo: 12,5 millones por Pyme. Al tratarse de líneas con garantía del FEI cuentan con condiciones preferentes. Quiero saber más sobre FEI Somos tu oportunidad de acceder a fondos europeos. Contáctanos de 9 a 16 horas en el 981 90 49 49 o te contactamos nosotros Déjanos tus datos Sobre nosotros Somos un socio estratégico para tu empresa. Atendemos a empresas y autónomos de toda España. Servicios genéricos Plan económico Arbitraje financiero Factoring sin recurso Tramitación de avales RAI/ASNEF Otros servicios Subvenciones Marketing Fiscal laboral y contable Hacienda y S.S. Análisis de clientes

Línea Reindus – Para empresas industriales

Línea Reindus Fondos para empresas industriales que necesiten inversión para sus proyectos Saber más   • Para inversión en creación o traslado de establecimientos industriales, ampliación de capacidad productiva o mejora de líneas de producción. • Amortización a 10 años. • Tipo de interés máximo de 4,09%.   Quiero saber más Si lo prefieres puedes llamarnos al 981 90 49 49 (de lunes a viernes de 9 a 16 horas)

Inversores privados para pymes

Trabajamos con todas las plataformas de crowdlending de España. Criterios de concesión más flexibles. . Salen operaciones que no saldrían en un banco. No supone CIRBE. Quiero saber más sobre crowdlending Somos tu oportunidad para conseguir los fondos que necesitas Contáctanos de 9 a 16 horas en el 981 90 49 49 o te contactamos nosotros Déjanos tus datos Sobre nosotros Somos un socio estratégico para tu empresa. Atendemos a empresas y autónomos de toda España. Servicios genéricos Plan económico Arbitraje financiero Factoring sin recurso Tramitación de avales RAI/ASNEF Otros servicios Subvenciones Marketing Fiscal laboral y contable Hacienda y S.S. Análisis de clientes

Solo para empresas

SOLO PARA EMPRESAS CRÉDITO CON DEVOLUCIÓN EN ESPECIE Descubre Trocobuy Más información en www.trocobuy.com

Nueva línea: Enisa Crecimiento

Enisa Crecimiento Fondos para Pymes del Ministerio de Economía, Industria y Competitividad Saber más   • Para mejoras competitivas o expansión mediante ampliación de la capacidad productiva, avances tecnológicos, aumento de gama de productos/servicios, diversificación de mercados… • Entre 25.000 y 1,5M de euros. • Hasta 9 años con 7 de carencia.   Quiero saber más Si lo prefieres puedes llamarnos al 981 90 49 49 (de lunes a viernes de 9 a 16 horas)

FW: Blackboard Collaborate Session Creation - Friday's Session

Here is the login information for our web meeting:

-----Original Message-----
From: Allred, Joe [mailto:Joe.Allred@mso.umt.edu]
Sent: Friday, March 17, 2017 8:32 AM
To: Gresswell, Kandi <candice.gresswell@montana.edu>; joe.hickman@umontana.edu; dana.ori@umontana.edu
Subject: FW: Blackboard Collaborate Session Creation - Friday's Session


________________________________
From: Joe Allred [notification-service@blackboard.com]
Sent: Friday, March 17, 2017 8:27 AM
To: Allred, Joe
Subject: Blackboard Collaborate Session Creation

Joe Allred:

You have scheduled the following Blackboard Collaborate session:
Name: Macro Conference Friday - Gilkey
Type: None
Starts: Mar 17, 2017 08:15 AM Mountain (MDT, North America/US)
Ends: Mar 17, 2017 04:00 PM Mountain (MDT, North America/US)

To join the teleconference only:
Call-in number: 571-392-7703
Moderator PIN: 585 844 624 833
Participant PIN: 192 889 605 915

To join the session, please click on the link below within 30 minutes of the specified time.
Join the Blackboard Collaborate session<https://sas.elluminate.com/m.jnlp?sid=2008093&miuid=ea05ab83a2d74294ad9ea3f275eff95c>

To invite others to join the session, e-mail the following link:
https://sas.elluminate.com/m.jnlp?sid=2008093&password=M.8E4EA9660A939A0AB9889A2182902C

To add this Blackboard Collaborate session to your calendar, please click the following link:
https://sas.elluminate.com/mvc?sid=2008093&miuid=ea05ab83a2d74294ad9ea3f275eff95c

________________________________
Your session may or may not be recorded. To playback recordings associated with the session, please click the appropriate link below:

Recording Link - The direct link to the last recording made in this session.
https://sas.elluminate.com/mr.jnlp?suid=M.EF7913E4CB281A63353E81DA498935&sid=2008093

Recording Link Table - A formatted table with links to all recordings made in this session.
https://sas.elluminate.com/mrtbl?suid=M.EF7913E4CB281A63353E81DA498935&sid=2008093

Recording Link List - A text list with links to all recordings made in this session.
https://sas.elluminate.com/mrlst?suid=M.EF7913E4CB281A63353E81DA498935&sid=2008093

########################################################################

To unsubscribe from the MACRAO list, click the following link:
http://listserv.gfcmsu.edu/scripts/wa.exe?TICKET=NzM2NDM1IG1hY3Jhb29ubGluZS5saXZlQEJMT0dHRVIuQ09NIE1BQ1JBTxizIkD0k%2BD3&c=SIGNOFF